We want you to feel as comfortable in the motorhome or caravan as at home. With our new Alde Compact 3030 Plus, you get continuous hot water per minute, and don’t have to worry about running out of hot water when you shower. The boiler is a development of our popular boiler model Alde Compact 3030, which gives you pleasant hydronic heating and hot water in your recreational vehicle.
Information
Article number: 30309191
Boiler construction
Alde Compact 3030 Plus internal heat exchanger consists of three concentric cylinders; the combustion chamber, the central heating cylinder and the hot water cylinder. The combustion chamber is made from aluminium, and is divided into two halves by a baffle plate, with the burner head located in the top half, and the flue gases venting through the bottom half. The combustion assembly is fixed to the end of the internal heat exchanger. It consists of the burner, combustion fan, gas valve, air intake and exhaust ducts, and gas line. Two electric heating elements are sealed inside the central heating cylinder, one for 1 kW, one for 2 kW. The room thermostat is integrated into the touchscreen control panel and connected to the boiler by a Registered Jack (RJ) cable.
| Height x depth x width | 310 x 340 x 510 mm |
| Weight without fluid | 15.3 kg |
| Gas: Propane / Butane | - |
| Output 1 | 3,3 kW / 3.8 kW |
| Consumption | 245 g/h / 275 g/h |
| Output 2 | 5,5 kW / 6,4 kW |
| Consumption | 405 g/h / 460 g/h |
| Pressure | I3+(28-30/37) I3B/P(30) I3B/P(37) |
| Volume of liquid, radiator fluid | 3,5 litres |
| Max pressure radiator water | 0,05 MPa (0,5 bar) |
| Volume of liquid, domestic hot water | 10 Litres |
| Max pressure domestic hot water | 0,3 MPa (3,0 bar) |
| System temperature (max) | 85 °C |
| Output element 230 - 240 V~ | 3150 - 3430 W |
| Current consumption 12 V DC (max) | 1,9 amp |
Alde heating system is ideal for you who want to live an independent and free life
different temperature zones
With a 2-zone system, the bedroom section can be set to a lower temperature, while e.g. the kitchen / seating area can have a higher temperature. This is perfect in many of today’s campers and RVs, where the bedroom section is properly separated from the kitchen / seating area. This not only increases overall comfort, it also saves fuel (LPG or electricity). The system is installed with separate convector circuits for each zone, where the temperature can be set individually.
continuous hot water
Are you travelling a lot or just like to take a long shower? The Alde Compact 3030 Plus has extra hot water capacity and provides you with continuous hot water. With your own hot water production you remain independent, bring the freedom into your leisure vehicle!
ALDE ICT
The Alde Intelligent Climate Technology automatically provides smooth, effective temperature transitions; the boiler calculates whether it needs to raise output or not to achieve the selected temperature. This is to avoid unnecessary energy being consumed and to ensure that the prioritised energy source is always used in first instance, unless there is an actual need to activate both electricity and gas. The boiler never uses more power than necessary.
In addition to the usual temperature setting, Alde’s smart system includes Night Mode and Day Mode functions, which provide the ability to increase comfort by automating temperature changes and switching selected functions on or off during the day or night.
When a Truma AC* is connected to the Alde system and an Alde outside temperature sensor, you enjoy the additional functionality of Alde’s intelligent climate technology. The AC is controlled from the same sensor as your Alde Heating System and can be controlled by the same smart Alde technology. If the Truma also has a heating function, it assists with the rapid heating of a cold vehicle.
* Truma Aventa (comfort, compact, compact plus). Truma Saphir comfort RC, Truma Saphir compact (from serial no. 23091001).
Alde Control panel
Alde control panel is simple, modern and easy to navigate. It should be easy for you to choose the energy source, set the temperature or hot water level.
