Discover the benefits of Alde

Self convection technology. The hydronic heating has long-lasting heat and the system with convectors creates self-convection in the vehicle. The warm air circulates and spreads in every cubic centimetre of the vehicle.

With the Alde hydronic heating system you can adapt the system to the size of the vehicle and get heat distributed everywhere in the vehicle. Hot fluid keeps the heat for long and self-convection makes the heat circulate by the use of nature laws. It gives me total comfort in all areas of the van with no cold spots.

Self-convection technology and constructed system creates a on-going gentle circulation of heat from the walls, to the indoor ceiling, centre of the vehicle and back again. A hydronic heating system is built for circulation of heat to all areas of the vehicle.

The components and the system are developed to work in really tough climate. It goes through rigours cold chamber testing down to -35 °C. The system is reliable and constructed to deliver heating comfort i all types of weather.

Alde launched its first heating system in 1966 and ever since then we have continuously developed and improve every single part of the system. The Alde system is reliable, efficient and provides a premium heating solution.

The Alde system can run on LPG or electricity or a combination of both. You can easily choose or prioritise your energy source so that it fits with what energy source you have available. No matter where you travel you can always power your Alde heating system.

The pipes and convectors in an Alde Hydronic heating system is placed along the walls behind furniture, cabinets etc. The pipes are made out of 16/22 millimeter aluminum pipes which makes it easy to make the installation sit tight to the walls. The Alde system is is made to be discrete and work without being obtrusive.

The Alde Engine Heat Exchanger is plumbed into both the Alde hydronic heating system and the engine’s radiator but the two fluids don’t mix. This means that you can use the Alde heating to preheat the vehicle engine by having the alde heating system fluid circulate through the heat exchanger where it heats up preheats the engine´s radiator loop.

You can use the heat from the heating system to preheat the vehicle engine ahead of your next trip.

Alde AquaClear UV-C is a water purification system for increased safety of water quality in low pressure applications. The disinfection is based on the latest UVC LED light technology. The system also includes an Alde carbon filter that ensures odorless water without bad taste or color. Alde AquaClear UV-C provides a layer of safety to the water supply, focused on removing harmful viruses and bacteria.

The circulating air heats furniture and walls as well as forming a cold barrier in front of the windows. An all-enveloping heat and natural air flow which produces an even and barely noticeable heat distribution throughout the vehicle. Thanks to pipes and convectors placed onto the walls and under windows.

Self convenction technology circulates the heated air and no fans placed along the floor and in the centre of the vehicle. Pets can comfortable rest lying on the floor and does not get irritated by fans that blow air all the time. Natural air movements don’t make animal hair fly around either.

The heating system has been developed and tested for decades. We love to talk and listen to real life campers to get their opinions, feedback and new ideas.

The Alde system has an intelligent control system that systematically calculates the current and future need of energy need. You don´t need to spend time on constantly control or adjust the heating settings since the Alde heating system takes care of that on its own.

The Alde heater is 2 in 1 heater in a compact format. Even though it has 8,5 kW heating power and a hot water tank of 10 liter it has a form that is neat and tight. The small footprint of an Alde heating system makes it perfect and easy to fit in an underfloor, under the bed or in wardrobe.

You can add different accessories like a towel rail, heating mat, engine heat exchanger into the Alde hydronic heating system. With Alde heating accessories you can tailor your heating system in order to maximize the heating and hot water comfort according to your specific needs.

Alde Underfloor heating with its heating pipes in the floor are connected up to your Alde heating system and is controlled either manually or via a shunt package for easy control. This gives you a complete heating system with a warm, comfortable floor on which to rest your feet. Alde underfloor is a perfect complement to the system and the standard piping/convectors along the walls of the vehicle.

To become a Alde Service partner you need to go through a Alde Service training where you learn how hydronic heating systems works, how you operate an Alde heating system and how you perform service and maintenance. By choosing an Alde Service partner you can feel safe that you get the right support and that the service and maintenance is made in time and with high quality

The accessory Alde heating mat emits and distributes heat that surrounds you and your passenger with comfortable, quiet heat via self-convection – no fans or other disturbing noice. In addition, the carpet has a sound-insulating ability, which further increases comfort.

The Alde system is made out of components that has been developed and tested for many years. We only use parts that last for long and has very little need for service & maintenance. When you choose an Alde system you can rely on the quality and not thinking about if the system needs service all the time (*Especially if you choose Alde Premium Antifreeze glycol).

Alde is a strong brand and the system is famous for its superior heating system. Having an Alde system in the vehicle helps keeping up the value of the vehicle on the aftermarket.

The brain of an Alde heating system is the advanced system logic and computerized control that is continuously improved and fine-tuned. The Alde heating system is so intelligent that you only have to do your pre-setting and then the system automatically takes care of the the need for heating or/hot water.

In a hydronic heating system the heated fluid is distributed by of one or two small circulation pumps that runs on 12 V power with currency use of max. 1.9 amps. The pumps follows the intelligence of the heater and run on high speed when the vehicle need to heat up or on low speed when the system reaches your set temperature.

Alde Flow is a separate hot water tank that can be added into the Alde heating system. the Alde Flow preheats the water before it comes into the heater where it is heated to the right temperature. The Alde heating system with an Alde Flow integrated produce can produce 3,5 liter of continuous hot water per minute (40 °C).

Wherever you place your feet you can get nice Alde underfloor heating, as the Alde underfloor heating can be placed almost anywhere in the floor of a vehicle.

By connecting the engine´s radiator and the alde heating system fluid loops you can reuse the heat from the two different loops. By re-using heat you become more environmentally friendly. You can also save money and energy on heating once you reach your destination.

Self-convection technology is based on the simple principle that warm air moves upwards. When it reaches the ceiling and cools down, it circulates back down towards the floor and is reheated. This way, the heat circulates around the entire vehicle.

The heating system with all its components is a robust and solid solution made out components that are developed to be long lasting and for tough conditions. Going off-grid with an Alde heating system inside you can always trust that you get heating and hot water when you arrive to your destination.

The system is reliable and constructed to deliver heating comfort i all types of weather. With Alde heating system you always get the superior heating comfort experience even when it is freezing cold outside.

Hydronic heating system is suitable for all vehicle sizes. For large vehicles that the system can be constructed to handle multiple zones and many different areas, even your storage/garage.

Even though it is cold and rough outside you don’t feel it inside, as the system solution with pipes and convectors behind the back of sofa or under the bed creates a barrier against the cold outdoors.

Floor heating provides heat from top to bottom (or from bottom to top). The floor in a vehicle can sometimes be colder due to less insulation or cross section of cold air from ventilation. With hydronic underfloor heating you get a heat barrier also at floor level.

Hydronic heating system can be tailored also for the smallest of vehicles. Nature takes care of the circulation which means that no fans are needed to transport heat throughout the vehicle. The heat circulation does not overthrow you and instead you get gentle and quiet heating. It simply becomes a feeling of comfort.

As the pipes and convectors placed next to the walls and under window forms a barrier against cold from outside, using an Alde heating system keeps walls, cabinets and other storage areas dry and fresh. Reduces risk of moisture damage and bad smell.

Alde Compact 3030 Plus has a boost function that can make the heater, with its built-in heat exchanger, prioritize hot water production. Alde hot water boost function makes it possible for you and your family to reduce waiting time before the hot water has reached acceptable temperature.

With an Alde heating system you can produce both heat and hot water from the same unit and at the same time. If you’d like, you can prioritize and boost individually. One unit, doing two things. With its compact format it is space-saving and you reduce the amount of piping throughout the vehicle.

Heating up a hydronic system can be a bit more time consuming, but an Alde heating system is designed to get the temperature up rapidly. The Alde heater with a total power of 8,5 kW (mix of LPG and Electric) ramps up fast in heat and starts almost instantly to distribute the heat throughout your vehicle.

Hydronic systems moves the same amount of heat with almost 4 times less electricity compared to forced/blown air.

Hydronic keeps the heat for longer which reduces both power needed and circle time needed to maintain heat level.

Alde heating system is monitored via discrete room and outdoor sensors. They measure the temperature with high precision and high frequency in order to always level the temperature. With our zone controlled and sensor monitored system you always get the optimal comfort.

Our full-scale systems are tested at temperatures down to -35 °C in our cold chambers to allow us to optimize comfort. Thus, you can safely trust that the heating system always perform.

Alde ICT = Intelligent climate technology, e.g. smart and calculating systems for different scenarios based on data from both outside and inside the vehicle. You don’t need to spend time on constantly adjust the heating system since it automatically gives you optimal heating comfort based on data from your surroundings.

The Alde system can be tailored for most vehicle types and layouts to match different needs. You can also choose several different add-ons, such as floor heating, heating mats, towel rails, mini convectors and so on. The system can be tailored and components can be combined to create the optimal heating and hot water solution for any season or activity.

Heat distribution via pipes and convectors all around the vehicles (not limited to a few distribution spots) minimizes temperature shifts throughout your vehicle.

Hydronic heating provides gentle circulation of heat. No fans placed along the floor or in the centre of the vehicle, which means that the system doesn’t shift dust around, no drying out your skin and no inhaling of dust.