With the Alde Compact 3030 you can enjoy even and comfortable heat, whatever the outside temperature, thanks to the sophisticated system that combines hydronic heating and convection technology to distribute heat evenly throughout the vehicle. Because we want you to feel just as comfortable in your motorhome or caravan as you do at home.
The Alde Compact 3030 heater is the latest in our Compact series, the market’s most compact 2-in-1 solution with hydronic heating and hot water in one.
Information
Article number: 30309090
Boiler construction
Alde Compact 3030 internal heat exchanger consists of three concentric cylinders; the combustion chamber, the central heating cylinder and the hot water cylinder. The combustion chamber is made from aluminium, and is divided into two halves by a baffle plate, with the burner head located in the top half, and the flue gases venting through the bottom half. The combustion assembly is fixed to the end of the internal heat exchanger. It consists of the burner, combustion fan, gas valve, air intake and exhaust ducts, and gas line. Two electric heating elements are sealed inside the central heating cylinder, one for 1 kW, one for 2 kW. The room thermostat is integrated into the touchscreen control panel and connected to the boiler by a Registered Jack (RJ) cable.
| Boiler height | 310 mm |
| Boiler depth | 340 mm |
| Boiler width | 340 mm |
| Weight without fluid | 13,2 kg |
| - | - |
| Gas: Propane / Butane | - |
| Output 1 | 3,3 kW / 3.8 kW |
| - Consumption | 245 g/h / 275 g/h |
| Output 2 | 5,5 kW / 6,4 kW |
| - Consumption | 405 g/h / 460 g/h |
| Pressure | I3+(28-30/37) I3B/P(30) I3B/P(37) |
| - | - |
| Volume of liquid, radiator water | 3,5 Litres |
| Max pressure radiator water | 0,05 MPa (0,5 bar) |
| Volume of liquid, domestic hot water | 10 litres |
| Max pressure domestic hot water | 0,3 MPa (3,0 bar) |
| Max system temperature | 85 °C. |
| - | - |
| Output element 230 - 240 V~ | 3150 - 3430 W |
| Current consumption 12 V DC | 1,9 amp (max) |
Alde ICT
Alde’s Intelligent Climate Technology automatically provides smooth, effective temperature transitions; the boiler calculates whether it needs to raise output or not to achieve the selected temperature. This is to avoid unnecessary energy being consumed and to ensure that the prioritised energy source is always used in first instance, unless there is an actual need to activate both electricity and gas. The boiler never uses more power than necessary.
In addition to the usual temperature setting, Alde’s smart system includes Night Mode and Day Mode functions, which provide the ability to increase comfort by automating temperature changes and switching selected functions on or off during the day or night.
When a Truma AC* is connected to the Alde system and an Alde outside temperature sensor, you enjoy the additional functionality of Alde’s intelligent climate technology. The AC is controlled from the same sensor as your Alde Heating System and can be controlled by the same smart Alde technology. If the Truma also has a heating function, it assists with the rapid heating of a cold vehicle.
* Truma Aventa (comfort, compact, compact plus). Truma Saphir comfort RC, Truma Saphir compact (from serial no. 23091001).
different temperature zones
With a 2-zone system, the bedroom section can be set to a lower temperature, while e.g. the kitchen / seating area can have a higher temperature. This is perfect in many of today’s campers and RVs, where the bedroom section is properly separated from the kitchen / seating area. This not only increases overall comfort, it also saves fuel (LPG or electricity). The system is installed with separate convector circuits for each zone, where the temperature can be set individually.
ALDE CONTROL PANEL
The Alde control panel is simple, modern and easy to navigate. It should be easy for you to select the energy source, set the temperature or hot water level.
